MB Crusher Cutters
MB Crusher represents a range of small and effective cutters for work even with complex materials. The cutters are designed with a low center of gravity to reduce vibration, rotation and load on the boom of the working machine. The MB cutters are the only ones in the world that are installed with a direct drive system with 2 motors. MB Crusher cutters are suitable for concrete wall and surface profiles, trenches, excavation, demolition, and channel dredging and for any use in urban areas, as well as on restricted work sites.
MB-R700 | MB-R800 | MB-R900 | |
---|---|---|---|
Recommended excavator, tons | ≥ 6 < 13 | ≥ 10 < 22 | ≥ 19 < 35 |
Cutter force, N | 19600 | 33900 | 40000 |
Revolutions per minute (Min/Max) | 80/110 | 60/80 | 60/80 |
Torque output, Nm | 5000 | 10000 | 13200 |
Pressure / Back pressure, bar | 350/4 | 350/4 | 350/4 |
Weight, tons | 0,6 | 1 | 1,4 |
Oil flow, l/min | 110-180 | 200-300 | 250-350 |
Drum diameter, mm | 500 | 600 | 680 |
MB-R700
Suitable for all works where there are materials that are difficult to cut or remove.
The MB cutter is suitable for profiling surfaces and concrete walls, excavation, trenching, demolition and channel dredging, as well as for any use in urban areas and on restricted sites.
MB-R800
Suitable for all works where there are materials that are difficult to cut or remove.
The MB cutter is suitable for profiling surfaces and concrete walls, excavation, trenching, demolition and channel dredging, as well as for any use in urban areas and on restricted sites.
MB-R900
Suitable for all works where there are materials that are difficult to cut or remove.
The MB cutter is suitable for profiling surfaces and concrete walls, excavation, trenching, demolition and channel dredging, as well as for any use in urban areas and on restricted sites.